Improving pedestrian safety using combined HOG and Haar partial detection in mobile systems

Objective: The objective of this study is to develop a novel algorithm on a mobile system that can warn drivers about the possibility of a collision with a pedestrian. The constraints of the algorithm are near-real-time detection speed and a good detection rate.

Method: Histogram of gradients (HOG)-based detection is widely used in pedestrian safety applications; however, it has low detection speed for real-time systems. Hence, it has no direct usage for mobile systems. In order to achieve near-real-time detection speed, partial Haar transform predetections are applied to an image before HOG detection. The partial and HOG detections are merged and a score-based confidence level is defined for the final detection phase. In this way, the outcome is prioritized and different warning levels can be issued to warn the driver before a possible pedestrian collision.

Results: The proposed algorithm provides an increase in detection speed (from 46 to 76 fps) and detection rate (from 80 to 91%) with respect to HOG-based pedestrian detection. It also improves confidence of the results by multidetection merging and score assignment to detections.

Conclusions: Performance improvement of the algorithm is compared with respect to state-of-the-art detectors/algorithms. Based on the detection rate and detection speed performance, it can be concluded that the proposed algorithm is suitable to be used for mobile systems to warn drivers about the possibility of collision with a pedestrian.     

Research on flow assurance of deepwater submarine natural gas pipelines: Hydrate prediction and prevention

The formation of hydrate will lead to serious flow assurance problems in deepwater submarine natural gas transmission pipelines. However, the accurate evaluation model of the hydrate blocking risk for submarine natural gas transportation is still lacking. In this work, a novel model is established for evaluating the hydrate risk in deepwater submarine gas pipelines. Based on hydrate growth-deposition mechanism, the mathematical model mainly consists of mass, momentum and energy conservation equations. Meantime, the model results are obtained by finite difference method and iterative technique. Finally, the model has been applied in the production of deepwater gas field (L Gas Field) in China, and the sensitivity analysis of relevant parameters has been carried out. The results show that: (a). The mathematical model can well predict the hydrate blockage risk in deepwater natural gas pipelines after verification. (b). Hydrate is easily formed at the intersection of horizontal pipeline and vertical riser, and the maximum blocking position often occurs in middle of the riser. (c). The hydrate blockage degree and length of hydrate formation region (HFR) decrease with the increase of gas transport rate. (d). The hydrate blockage degree and length of HFR decrease with the increase of gas transport temperature. (e). The hydrate blockage degree and length of HFR increase with the extension of horizontal pipeline. (f). Injecting inhibitors can effectively inhibit hydrate formation and blockage, but the improvement of transmission measures can significantly reduce the dosage of inhibitor. It is concluded that measures such as increasing gas transportation rate and temperature, shortening horizontal pipeline length, optimizing inhibitor injection point and injection rate can play a safe, economic and efficient role in hydrate preventing and controlling.     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

2016—2020年全国化工和危险化学品事故分析研究*

为分析“十三五”期间（2016—2020年）我国化工和危险化学品事故发生情况，统计“十三五”期间化工和危险化学品事故数量及死亡人数，从发生月份、发生区域、行业分布等方面分析事故特征，从事故类别、事故环节、关键作业等方面分析事故原因，总结2011—2020年我国化工和危险化学品事故发展趋势，按照全国4大经济区域研究2013—2020年事故特征。结果表明:“十三五”期间我国化工和危险化学品事故数量呈下降趋势，死亡人数出现波动，总体形势较为平稳。2011—2020年化工和危险化学品事故风险向中西部转移趋势明显，东北、西部地区事故死亡率普遍高于东部地区。研究结果可为相关行业从业者及监管部门提供决策参考。     

北京首都机场绿色滑行时间估算

采用北京首都机场2014年实际CDM地面放行数据确定航空器的污染物排放量与离场排队飞机数量和落地滑入飞机数量的强关联性,构建包含这两个解释变量为影响因素的多元线性回归模型,用以估算几种常见机型在首都机场地面运行时的最小污染物排放量和绿色滑行时间。对比实际污染物排放量与最小污染物排放量,得出首都机场离场地面污染物排放量远远超过最小污染物排放量。     

Analytical mapping of research on disaster management,types and role of ICT during 2011–2018

Catastrophic disasters like earthquake and flood cause widespread destruction and financial devastation. This has brought disaster management into limelight making it a burgeoning academic research field. The remarkable rise of ICT (Information and Communication Technology) has instigated the scientific world to incorporate these technologies in disaster management. This study presents scientometric analysis to identify the status quo of research on the management of various disasters and role of ICT in it. This paper uses bibliographic data retrieved from Scopus for the observation period from 2011 to 2018. We provide extensive insights into growth of publications, citation pattern and their connectedness with other subject disciplines. Furthermore, we identify most productive and influential countries, institutes and journals. Our study analyses co-occurrence of keywords using Visualization of Similarities (VOS) Viewer. This structured overview will enhance the understanding of this field leading to more focussed and purposeful research.     

电气伤亡事故的主客体场景指标设计及统计规律

为合理预防控制电气伤亡事故的发生提供依据，通过检索查阅国内外相关文献和政府网站公布的电气伤亡事故和案例情况描述，选取105起典型电气伤亡事故案例进行统计与分析；针对电气伤亡事故涉及的主客体场景要素，对其进行筛选、分类、排序及指标设计，形成系统的电气伤亡事故指标体系；结合现实情况对统计结果进行原因分析，根据统计结果，得到电气伤亡事故发生的一般规律，据此提出安全管理中需要关注与重视之处，以此来预防电气伤亡事故的发生。     

关于城市河流水污染防治技术应用和研究

随着我国经济的不断发展,各种工厂也大量的成立,而这也使得很多废弃物及废水被过度排放到湖泊与河流之中,进而导致其出现了严重的污染问题。污染不仅对人们的生活质量产生了影响,同时也对生态的平衡发展产生了很大的阻碍,业已经成为社会各界高度关注和重视的问题。基于此,本文围绕城市河流水污染的现状进行了分析,对于污染产生的原因也进行了阐述,针对城市河流水污染防治技术的应用也进行了探讨和研究,以期可以有效解决我国出现的河流水污染问题,进而为人们及社会营造一个全新、绿色的河流环境。     

基于多孔环形喷嘴的可燃爆粉尘分散特征的密度效应研究*

为了研究不同密度的可燃爆粉尘在内置多孔环形喷嘴的20 L爆炸特性测试装置中的分散特征，基于负载粒子流方法、耦合DPM动量平衡方程和时间平均 Navier Stokes控制方程组，实现3种不同密度的煤粉、铝粉和锆粉在20 L爆炸测试装置中粉尘分散全过程的数值模拟。研究结果表明:多孔环形喷嘴的分散较为均匀，但是约束管道末端存在局部粉尘残留区，致使爆炸仓内真实粉尘浓度远低于形式浓度；爆炸仓中心位置的最大湍动能随着粉尘密度的增加而减小，只有显著地变化粉尘密度才能展示区分度较高的浓度峰值和抵达浓度峰值的时间。